Continuous Flow EDS
The Continuous Flow EDS is specifically designed for high flow and minimal solids. The high flow rate is designed to cope with short periods of high demand through the working day and/or known flow rates in short periods. Continous systems don’t normally come with large holding tanks, as once the system starts its sterilization and cooling it will continue to run until the flow of effluent has finished. The systems can run at high temperatures >140DegC for very short hold times. The system is designed to make the most of heat recovery and to be as efficient as possible.
|Flow (L/hr)||Holding tank (Litres)||Steam||Electric||Air||Water||BSL Category||Solids||Sterilizing temperature|
|100 L/hr||200 L||II/III||X||140°C for 1 minute|
|300 L/hr||200 L||II/III||X||140°C for 1 minute|
|500 L/hr||300 L||II/III||X||140°C for 1 minute|
|1000 L/hr||500 L||X||II/III||X||140°C for 1 minute|
AstellBio EDS Questionnaire
Start planning your EDS system
Astell Touchscreen Controller
Digital process management with security and repeatability.
Astell supplies all its steam generators fitted with its unique PLC based touchscreen controller. It provides an easy-to-use interface for selecting and customising cycle data, changing machine parameters and reviewing the in-built archive capable of storing up to 5,000 previously run cycles. The touchscreen control module provides automatic operation and monitoring of the entire system, including data logs, alarms, and sensor information.